• 氣動密封件

氣動密封件

GMORS為氣壓缸和閥門提供大量氣動密封件,防塵密封 ,活塞桿密封,活塞密封和阻尼密封件。 這些密封件經常在高速動態應用中使用。 GMORS生產具有出色的低摩擦和耐磨性的氣動密封件。
GMORS使用具有內部潤滑劑的橡膠材料有助於減少磨損並延長密封件的使用壽命。

刮塵密封件 - UA6 / UA7 / UA25 / UB1
ua6.jpg ua7.jpg ua25.jpg ub1.jpg

對稱桿/活塞密封件 - UF5 / UF6
uf5.jpg uf6.jpg

桿密封 - UB3
ub3.jpg

活塞密封 - UC3 / UC7
uc3.jpg uc7.jpg

阻尼密封件 - UE1
ue1.jpg

Pneumatic Seals

* 1 Mpa = 10 Bar, 1 Bar = 14.5 psi, 1 Mpa = 145 psi

UA6
ua6.jpg

Pneumatic Combination Wiper / Rod Seal
This pneumatic rod seal/wiper Set profile is fitted into housings with a circlip recess according DIN 7993 (type B). The seal/wiper element is mounted and retained by the circlip. Care should be taken that neither scraper nor sealing lips are damaged by sharp edges. Exchanging the rod seal/wiper Set profile without removing the piston rod is possible if a recess is provide.

Material : FKM
Working Pressure: ≦1.6 Mpa
Working Temperature: -10°C~+150°C
Surface Speed: ≦1.0 m/s

UA7
ua7.jpg

Pneumatic Combination Wiper / Rod Seal
This seal is used for preventing entry of dust, and protecting the whole equipment. The double-lip design of TPU material could provide the double-sealing function, and keep the lubrication film under stable. The proportion is small, and easily to be dis/assemble.

Material : ESTER TPU
Working Pressure: ≦1.6 Mpa
Working Temperature: -30°C~+80°C
Surface Speed: ≦1.0m/s

UA25
ua25.jpg

Double Lip Rod Wiper
This seal is used for preventing entry of dust, and protecting the whole cylinder. It could provide the double-sealing function, and keep the lubrication film under stable.

Material : NBR
Working Temperature : -35°C ~ +80°C
Working Pressure : ≤ 1.6 MPA
Surface Speed : ≤ 1.0 m/s

UB1
ub1.jpg

Pneumatic Combination Wiper / Rod Seal
The profile is assembled into a housing designed with a circlip groove as DIN 7993 (type B). It is retained by the rounded outside diameter which makes it easy to snap into the groove. Remove all sharp corners to avoid damaging the lips of the scraper and the seal during assembly.
 

Material : ESTER TPU
Working Pressure: ≦1.6 Mpa
Working Temperature: -35°C~+80°C
Surface Speed: ≦1.0m/s

UB3
ub3.jpg

Asymmetrical Pneumatic Rod Seal
Laying stress on wear proof. Exclusively for small diameter cylinders. Compared with O-Rings, superior durability and characteristics of friction.

Material : NBR/FKM
Working Pressure: ≦1.0 Mpa
Working Temperature: -35°C~+80°C/-10°C~+150°C
Surface Speed: ≦1.0m/s

UC3
uc3.jpg

Pneumatic U-Cup Piston Seal
The seal is a compact u-cup with asymmetrical profile and special pneumatic sealing edge on the dynamic sealing lip. The asymmetric profile with the longer and thicker static sealing lip guarantees a secure seat in the groove base. The special pneumatic sealing edge provides a very good seal with low friction and maintains an effective lubrication film.

Material : NBR/FKM
Working Pressure: ≦1.6 Mpa
Working Temperature: -20°C~+80°C/-20°C~+200°C
Surface Speed: ≦1.0m/s

UC7
uc7.jpg

Low Friction Pneumatic Piston Seal
Compact type of both sides pressure. Exclusively for pistons. Compared with O-Rings, superior characteristics of friction and cross section design so that they can restrain from causing rolling and twisting.

Material : NBR/FKM
Working Pressure: ≦1.0 Mpa
Working Temperature: -35°C~+80°C/-20°C~+200°C
Surface Speed: ≦1.0m/s

UE1
ue1.jpg

Pneumatic Damper Seal
These pneumatic cushioning seals profile PP are easily snapped into the groove, which should be free of all contaminants before installation.
Care should be taken that the ealing lips are not damaged by sharp edges during installation. Initial lubrication is essential for a long service life.

Material : NBR/FKM
Working Pressure: ≦1.0 Mpa
Working Temperature: -35°C~+80°C/-20°C~+200°C
Surface Speed: ≦1.0m/s

UF5
uf5.jpg

Low Friction Pneumatic Symmetrical Piston/Rod U-Cup Seal
Packings for both pistons and rods of pneumatic cylinders. Avoid using this packing for lubricative cylinder because it is used exclusively for non-lubrication.

Material : NBR/FKM
Working Pressure: ≦1.0 Mpa
Working Temperature: -35°C~+80°C/-20°C~+200°C
Surface Speed: ≦1.0m/s

UF6
uf6.jpg

Low Friction Pneumatic Symmetrical Piston/Rod U-Cup Seal
Packings for both pistons and rods of pneumatic cylinders. Avoid using this packing for lubricative cylinder because it is used exclusively for non-lubrication.

Material : NBR/FKM
Working Pressure: ≦0.8 Mpa
Working Temperature: -35°C~+80°C/-10°C~+150°C
Surface Speed: ≦1.0m/s

 

尺寸表下載

氣動密封件尺寸表

 
材料應用一覽表